Toll Free    Call 1-888-637-1737
Proudly Manufacturing Engraving, Routing, and Marking Solutions in the USA Since 1983

Clamps & Fixtures Options

Multi Mat Holder For Engraving Machines & CNC Router MULTI MAT
Multi Mat eliminates the need for double stick tape, clamps, vacuum tables, and most other hold down methods on many engravable items. Multi Mat will hold most types of engraving stock, including brass, aluminum, plastic, stainless steel and acrylic. Just press it into place on any size engraving table and you’re ready to go, and because Multi Mat is produced with a special rubber coating on both sides, it cleans easily for extended use.

Multi Mat Buy Now

Rotary Pen Fixture for Engraving Systems
PEN ROTARY ATTACHMENT

Now you're not just limited to engraving lengthwise on your pens, cigar holders, miniature baseball bats or other cylindrical items…with the PEN ROTARY ATTACHMENT, you can engrave around the entire circumference! Compatible with the Vision 1612, 1624, 2424, 2448, 2525 and 2550, it can hold items up to 1.25" in diameter and up to 7" in length.


Wedge Clamp for Engraving Machine & CNC Router
WEDGE CLAMP
Simply slide the clamp onto the T-slot table surface and position it over the edge of the engraving stock. The downward clamping force eliminates bowing and problems. This clamp can be used with material up to 1/4” thick. Fits all Vision T-slot tables.

Wedge Clamp Buy Now


Edge Clamp for Engraving Machines & CNC Routers EDGE CLAMP
This clamp is designed to secure engraving materials from the top surface and avoids bowing in most applications. This clamp will hold material thicknesses of .020, .032, .062, and .125 by rotating the clamp and tightening a thumbscrew. Fits all Vision T-slot tables.

Edge Clamp Buy Now

Coner Clampe for Engraving Machines & CNC Routers CORNER CLAMP
This clamp is designed to hold down square or rectangular plates. By lining up the “V” cut-out of the clamp with the corner of the plate, the engraver is allowed maximum engraving space. It will accommodate material as thin as 1/32”. Fits all Vision T-slot tables.

Corner Clamp Buy Now

Small Self Centering Vise SMALL SELF CENTERING VISE
For use with Express, VE810, Phoenix 1212, 1612 and the 1624
This fixture allows you to hold various small items such as nameplates, signs and placards. Dowel pin settings allow this item to work with most Vision fixtures for even more versatility.

Small Self Centering Vise Buy Now

Universal Clamping bars for Engraving Machines UNIVERSAL CLAMPING BARS w/MEDALLION HOLDER

These clamping bars hold small flat items, including name badges with pin backs, securely. By rotating the clamping bars they will hold 1 to 3 round objects at a time. This allows you to engrave multiple notary seals, coasters, paperweights, and a variety of other circular items. With a place for the “eye” of medallions, this clamp adapts to any vise or table that has a T-slot system.

Universal Clamping Bars w/Medallion Buy Now

Self Centereing Vise Deep for VE-810 Engraving Machine
SELF-CENTERING DEEP VISE

This vise can be used with the VE-810XD and the VE-810 or the Phoenix 1212. The self-centering design allows easy setup of odd-shaped items up to 3 1/4" deep.

Self-Centering Deep Vise Buy Now



Ring Attachment for MAX, MAX Pro Engraving Machines RING ATTACHMENT
This fixture allows you to engrave around the inside and outside of most rings or other cylindrical objects.
(Compatible with the MAX and Max Pro.)
Min. Dia: 5/8" Max Dia: 4"

Ring Attachment Buy Now

Pen & Medalion Jig For Engraving Machines
PEN & MEDALLION FIXTURE
This is a double-sided fixture that when turned in one direction accommodates a pen and when turned in the other direction accommodates a medallion, seal, or other circular item. With a space for the “eye” of the medallion, this fixture is usable with the Versa Vise or Quick-Lock vise. Fits all Vision T-slot tables.

Pen & Medallion Fixture Buy Now


Universal Push Down Clamps for Engraving Machine & CNC Router
PUSH-DOWN CLAMP

This double-sided clamp secures items from the edge. It is ideal for items that are being cut, contoured, or engraved. Fits all Vision T-slot tables.

Push Down Clamp kit Buy Now



Universal Pin Jig for Engraving Machine UNIVERSAL PIN FIXTURES
Available for the Versa Vise, Quick-Lock Vise, Vision T-slot table, and Self-Centering Vise. These fixtures enable engraving on all unique-sized pens, lighters, knives, key-chains, and many other irregular-shaped items.

Universal Pin Fixture Buy Now

Multiple universal Pin Jig for Engraving Machines MULTIPLE UNIVERSAL PIN FIXTURE VISE
This combination of a Versa Vise and three universal pin fixtures enables quick and easy setup for engraving multiple items of various shapes. Fits all Vision T-slot tables except the Vision Express and VE810 Small Engraver.

Multiple Universal Pin Fixture Buy Now

Versa Vise for Engraving Machines VERSA VISE II
The Versa Vise can be used alone or in conjunction with other fixtures to hold a variety of shapes and sizes.

Versa Vise II Buy Now


Universal Clamping bars for Engraving Machines SEAL FIXTURE
This fixture enables engraving on 1 5/8" & 2" diameter notary seals, medallions, coasters, paperweights, and other round objects. Can be used with the Quick-Lock or Versa Vise. Fits all Vision T-slot tables.

Seal Fixture Buy Now

Quick Lock Vise for Engraving Machines & CNC Routers QUICK-LOCK VISE
This vise is specifically designed for T-slot table users. Its “cam” type locking device allows for quick changing of parts. Supplied with a removable front clamping plate which allows for holding thicker items. Fits all Vision T-slot tables.

Quick-Lock Vise Buy Now

Quick Lock Vise for Engraving Machines & CNC Routers PEN ENGRAVING KIT MAX (MAX & Max Pro ONLY)
This fixture allows you to engrave around the outside of most pens with the MAX and MAX PRO Engraver.

Pen Engraving Kit Vise Buy Now

Adjustable Pen Fixture
ADJUSTABLE PEN FIXTURE
This piece of engraving equipment enables engraving on most sizes of pens and cylindrical items that vary in diameter from end to end. Available for most computerized engravers. It is also usable with the Versa Vise and Self-Centering Vise. Fits all T-slot tables.

Adjustable Pen Fixture Buy Now

QUICK-LOCK LEATHER BRACELET AND KEYCHAIN VISE
This piece of engraving equipment is specifically made for engraving leather bracelets and keychains. Designed to work with any Vision T-slot Table, it features a removable front clamping plate with a "cam" type locking device. Watch the video - Leather Engraving

Quick-Lock Leather Bracelet and Keychain Vise Buy Now

BOTTLE ADAPTER
For use with Max and Max Pro engraver only.

Bottle Adapter Buy Now



Extended Service Agreement for Vision Engraving Machines & CNC Router

VISION EXTENDED WARRANTY PLANS
Protect your investment with an extended service plan before your warranty expires! Extended Service Plans cover the cost of service parts, labor, and annual preventive maintenance completed at the factory. For more information or to purchase a service plan, please call our technical support department at 602-439-0700.