Engraving Machine & CNC Router Accessories

Accessory Strip for all our Vision Engraving machines.

This piece of engraving equipment enables engraving on most sizes of pens and cylindrical items that vary in diameter from end to end. Available for most computerized engravers. It is also usable with the Versa Vise and Self-Centering Vise. Fits all T-slot tables.

The Raster™ Pen Braille insertion device is an option for all our CNC routers and for our 16 Series and 24 Series engravers. The Raster™ Method of Braille insertion and Raster™ Pen are licensed, patented products owned by Accent Signage Systems, Inc. Minneapolis, MN.

For use with Max and Max Pro engraver only.

Easy to install bracket for the Raster™ Pen Braille insertion device.

Designed to assist in burnishing lacquered brass and anodized metals with just the right amount of pressure. Also used to mark glass. Available in 1/8”, 11/64”, 1/4”, 4mm and 6mm sizes.

This clamp is designed to hold down square or rectangular plates. By lining up the “V” cut-out of the clamp with the corner of the plate, the engraver is allowed maximum engraving space. It will accommodate material as thin as 1/32”. Fits all Vision T-slot tables.

Durable aluminum handle “Vision” cutter wrench.

DACS, an alignment tool which provides perfect print-to-cut registration for our CNC routing machines. This easy-to-use system requires minimal training and setup time, and is the most cost-effective, accurate solution for improving digital finishing.

The DIAMOND DRAG ADAPTER screws onto the end of almost any spindle and allows simple & solid mounting for diamond scratch engraving. Spindle bearing strain is eliminated using this device.

The DIAMOND DRAG ADAPTER screws onto the end of almost any spindle and allows simple & solid mounting for diamond scratch engraving. Spindle bearing strain is eliminated using this device.

The DIAMOND DRAG ADAPTER screws onto the end of almost any spindle and allows simple & solid mounting for diamond scratch engraving. Spindle bearing strain is eliminated using this device.

A. Split Collet – Used for holding cutters solidly while doing light milling, cutouts, & other heavy engraving. Collet spindles hold both long & short cutters.
B. Solid Collet – Converts your collet spindle to a standard top load spindle for standard engraving or burnishing.
C. Drawbar – For use with the collet spindle.

This clamp is designed to secure engraving materials from the top surface and avoids bowing in most applications. This clamp will hold material thicknesses of .020, .032, .062, and .125 by rotating the clamp and tightening a thumbscrew. Fits all Vision T-slot tables.

Must be factory installed, and cannot be removed for single head engraving.

Choice of 1/4″ or 11/64″ top loading or optional collet spindle.

Heavy duty casters for table stands.

This high-frequency spindle is perfect for deep engraving into metals! The high RPM allows cutters to stay sharp much longer for increased production, and allows for much faster speed in engraving. Includes control box; no nose cone. Available as an option for our 16 Series and 24 Series Engravers, as well as our 25 Series Routers (with engraving head option).

Available for all engraving machines. Belts are made of durable 1/8”urethane for long wear and better traction. Machine serial number required when purchasing to ensure correct belt is selected for machine.

Multi Mat eliminates the need for double stick tape, clamps, vacuum tables, and most other hold down methods on many engravable items. Multi Mat will hold most types of engraving stock, including brass, aluminum, plastic, stainless steel and acrylic. Just press it into place on any size engraving table and you’re ready to go, and because Multi Mat is produced with a special rubber coating on both sides, it cleans easily for extended use.

This combination of a Versa Vise and three universal pin fixtures enables quick and easy setup for engraving multiple items of various shapes. Fits all Vision T-slot tables except the Vision Express and VE810 Small Engraver.

The Oscillating Knife is an available option for Vision’s CNC routers/engravers, giving them the ability to cut semi and none rigid materials with the precision quality and ease of use our systems are known for.

This is a double-sided fixture that when turned in one direction accommodates a pen and when turned in the other direction accommodates a medallion, seal, or other circular item. With a space for the “eye” of the medallion, this fixture is usable with the Versa Vise or Quick-Lock vise. Fits all Vision T-slot tables.

This fixture allows you to engrave around the outside of most pens with the MAX and MAX PRO Engraver.

Now you’re not just limited to engraving lengthwise on your pens, cigar holders, miniature baseball bats or other cylindrical items…with the PEN ROTARY ATTACHMENT, you can engrave around the entire circumference! Compatible with the Vision 1612, 1624, 2424, 2448, 2525 and 2550, it can hold items up to 1.25″ in diameter and up to 7″ in length.

This double-sided clamp secures items from the edge. It is ideal for items that are being cut, contoured, or engraved. Fits all Vision T-slot tables.

This piece of engraving equipment is specifically made for engraving leather bracelets and keychains. Designed to work with any Vision T-slot Table, it features a removable front clamping plate with a “cam” type locking device.

This vise is specifically designed for T-slot table users. Its “cam” type locking device allows for quick changing of parts. Supplied with a removable front clamping plate which allows for holding thicker items. Fits all Vision T-slot tables.

This fixture allows you to engrave around the inside and outside of most rings or other cylindrical objects. (Compatible with the MAX and Max Pro.)

Min. Dia: 5/8″ Max Dia: 4″

These riser blocks are designed to give your Vision-manufactured engraving table an additional 1 5/8″ of clearance. The unit is sold as a kit and is easily user installed.

This fixture enables engraving on 1 5/8″ & 2″ diameter notary seals, medallions, coasters, paperweights, and other round objects. Can be used with the Quick-Lock or Versa Vise. Fits all Vision T-slot tables.

This vise can be used with the VE-810XD and the VE-810 or the Phoenix 1212. The self-centering design allows easy setup of odd-shaped items up to 3 1/4″ deep.

A spindle for the series 1 and 2 Vision and Phoenix.

A spindle for the series 3 Vision.

This fixture allows you to hold various small items such as nameplates, signs and placards. Dowel pin settings allow this item to work with most Vision fixtures for even more versatility. For use with Express, VE810, Phoenix 1212, 1612 and the 1624.

For use with the 1612 or 1624 Engraver, new and older models.

Heavy-duty stand with durable heavy duty casters, accommodates the 1612, 1624, 2424, 2448, Max or Max Pro.

The Unist Micro-Dispensing Coolant System with solenoid, significantly reduce the cost and volume of cutting fluid used in metal cutting, forming, and stamping operations. Applying a vegetable-based, biodegradable lubricant in controlled amounts will reduce wear and tear of cutting tools during machining operations.

The Unist Micro-Dispensing Coolant System with solenoid, significantly reduce the cost and volume of cutting fluid used in metal cutting, forming, and stamping operations. Applying a vegetable-based, biodegradable lubricant in controlled amounts will reduce wear and tear of cutting tools during machining operations.

These clamping bars hold small flat items, including name badges with pin backs, securely. By rotating the clamping bars they will hold 1 to 3 round objects at a time. This allows you to engrave multiple notary seals, coasters, paperweights, and a variety of other circular items. With a place for the “eye” of medallions, this clamp adapts to any vise or table that has a T-slot system.

Available for the Versa Vise, Quick-Lock Vise, Vision T-slot table, and Self-Centering Vise. These fixtures enable engraving on all unique-sized pens, lighters, knives, key-chains, and many other irregular-shaped items.

Designed for chip removal while doing cutouts. Nose is constructed of durable plastic. Vacuum tube allows for hookup to vacuum pump or shop vac.

Quiet vacuum pump for removing engraving chips. The unit has a large filtered canister with replaceable collection bag. Includes vacuum nose cone and kink resistant hose.

A spindle for the VE810.

The Versa Vise can be used alone or in conjunction with other fixtures to hold a variety of shapes and sizes.

Protect your investment with an extended service plan before your warranty expires! Extended Service Plans cover the cost of service parts, labor, and annual preventive maintenance completed at the factory. For more information or to purchase a service plan, please call our technical support department at 602-439-0700.

Simply slide the clamp onto the T-slot table surface and position it over the edge of the engraving stock. The downward clamping force eliminates bowing and problems. This clamp can be used with material up to 1/4” thick. Fits all Vision T-slot tables.