VE 810 - Small Format Desktop Engraver
)
- NEW LCD Screen
- 8”x 10” engraving area w/ aluminum T-slot table
- Red laser pointer for job preview
See VE 810 Video
Small Engraver
Vision Engraving & Routing Systems’ VE 810 Engraver is Vision's most compact and cost-effective small desktop engraver. This computerized, small engraver is perfect for users who are new to engraving as well as for seasoned professionals. With an 8" x 10" table, this machine is perfect for marking and creating tags, plates, small signs, notary seals, knives, cigarette lighters, gifts, jewelry, awards, trophy plates, and much more. The electronics are contained within the machine, which allows for its compact size. The front panel contains large, easy-to-read buttons for optimum control of the engraving process.
The VE 810 Engraver offers:
• An easy-to-read LCD screen
• Ethernet connection capabilities
• Faster engraving speeds due to our internal Series 3 Controller
• A red laser job preview
• Advanced motion controls, providing accuracy as well as quiet and efficient operation
• An electronic sensor for automatic surface setting, making job set-up easy
• Ability to run from many software programs (see partial list below) using a desktop or laptop PC
• And much more!
All of our small engravers are made in the USA, built to be rugged, reliable and backed with a superior customer support team.
Additional Technical Information for the VE 810 Small Engraver (please click on the Specifications tab above for more)
• Includes aluminum T-slot table with 1" spindle clearance
• Steel frame construction
• Linear rails and Teflon-coated lead screws for minimal maintenance
• 11/64” or 1/4" top-loading spindle
• Full-featured front panel includes independent Z-Axis and spindle controls
• Quiet micro-stepping motors
• Runs direct from Vision, Vision PRO-LT, Vision PRO, Flexi-Sign, SignLAB, EngraveLAB, Enroute, Type 3
and many other software packages
• Note: Some items may require a holding fixture to be engraved. Ask our Sales team about your desired
job application.
| VE-810 Specifications Chart | |
|---|---|
| MAX. Engraving Area | 8" x 10" |
| MAX. Work Piece Clearance | 14.5"(L) x Any Width x 1"(H) |
| Z-Axis Stroke | 1" |
| Spindle Size/Type | 1/4" or 11/64" Top-Load, Collet Spindle Available |
| Spindle Motor Power / RPM | 1/7HP / 14,000 RPM (max) |
| Resolution / Speed | 0.0002" - 5"/sec |
| Table Type | Aluminum T-slot |
| Interface | Ethernet |
| Controller | Built-In Series 3 High-speed Controller |
| Warranty | 1 Year Limited |
| Power Requirements | 110/220V 5 Amp |
| Shipping Dimensions | 27"(W) x 21"(D) x 18"(H) - 60lbs |
 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
SELF-CENTERING DEEP VISE |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
PEN ROTARY ATTACHMENT Now you're not just limited to engraving lengthwise on your pens, cigar holders, miniature baseball bats or other cylindrical items…with the PEN ROTARY ATTACHMENT, you can engrave around the entire circumference! Compatible with any Vision Engraving System, it can hold items up to 1.5" in diameter (1.25" dia on VE-810) and up to 7" in length. Part # 15-0063-00 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
MULTI MAT Multi Mat eliminates the need for double stick tape, clamps, vacuum tables, and most other hold down methods on many engravable items. Multi Mat will hold most types of engraving stock, including brass, aluminum, plastic, and acrylic. Just press it into place on any size engraving table and you’re ready to go, and because Multi Mat is produced with a special rubber coating on both sides, it cleans easily for extended use. Size Part # 8x10 15-1100-00 8x12 15-1107-00 12x12 15-1101-00 16x12 15-1102-00 12x24 15-1106-00 16x24 15-1103-00 24x24 15-1104-00 24x48 15-1105-00 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
WEDGE CLAMP Simply slide the clamp onto the T-slot table surface and position it over the edge of the engraving stock. The downward clamping force eliminates bowing and problems. This clamp can be used with material up to 1/4” thick. Fits all Vision T-slot tables. Part # 200114-00 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
EDGE CLAMP This clamp is designed to secure engraving materials from the top surface and avoids bowing in most applications. This clamp will hold material thicknesses of .020, .032, .062, and .125 by rotating the clamp and tightening a thumbscrew. Fits all Vision T-slot tables. Part # 200113-00 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
CORNER CLAMP This clamp is designed to hold down square or rectangular plates. By lining up the “V” cut-out of the clamp with the corner of the plate, the engraver is allowed maximum engraving space. It will accommodate material as thin as 1/32”. Fits all Vision T-slot tables. Part # 200115-00 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) ) |
UNIVERSAL CLAMPING BARS w/MEDALLION HOLDER These clamping bars hold small flat items, including name badges with pin backs, securely. By rotating the clamping bars they will hold 1 to 3 round objects at a time. This allows you to engrave multiple notary seals, coasters, paperweights, and a variety of other circular items. With a place for the “eye” of medallions, this clamp adapts to any vise or table that has a T-slot system. Part # 200110-00 Part # 200110-TN (w/ T-nuts) |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
PEN & MEDALLION FIXTURE This is a double-sided fixture that when turned in one direction accommodates a pen and when turned in the other direction accommodates a medallion, seal, or other circular item. With a space for the “eye” of the medallion, this fixture is usable with the Versa Vise or Quick-Lock vise. Fits all Vision T-slot tables. Part # 200106-00 Part # 200106-TN with T-nuts |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
PUSH-DOWN CLAMP This double-sided clamp secures items from the edge. It is ideal for items that are being cut, contoured, or engraved. Fits all Vision T-slot tables. Part # 15-0010-00 - (one 4” clamp) Part # 15-0010-01 - (one 2.5” clamp) Part # 15-0010-ROUT - (two 2.5” clamps, two 4” clamps & one nut driver) Part # 12-0004-00 - (nut driver) |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
UNIVERSAL
PIN FIXTURES Available for the Versa Vise, Quick-Lock Vise, Vision T-slot table, and Self-Centering Vise. These fixtures enable engraving on all unique-sized pens, lighters, knives, key-chains, and many other irregular-shaped items. Part # 200111-00 Part # 200111-TN with T-nuts |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
MULTIPLE UNIVERSAL PIN FIXTURE VISE This combination of a Versa Vise and three universal pin fixtures enables quick and easy setup for engraving multiple items of various shapes. Fits all Vision T-slot tables. Part # 200112-00 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
VERSA VISE |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
SEAL FIXTURE This fixture enables engraving on 1 5/8" & 2" diameter notary seals, medallions, coasters, paperweights, and other round objects. Can be used with the Quick-Lock or Versa Vise. Fits all Vision T-slot tables. Part # 200107-00 Part # 200107-TN (w/ T-nuts) |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
QUICK-LOCK VISE |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
DIAMOND DRAG ADAPTER The DIAMOND DRAG ADAPTER screws onto the end of almost any spindle and allows simple & solid mounting for diamond scratch engraving. Spindle bearing strain is totally eliminated using this device. Part # 502390-00 - (Adapter only, diamond not included) Part # 200698-00 - (Adapter including 90° diamond) Part # 200700-00 - (Adapter including 120° diamond) Part # NRD-125-0.80 (120° diamond insert only) Part # NRD-125-1.90 (90° diamond insert only) |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
DRAWBARS / COLLETS A collet spindle allows you the versatility to change cutter sizes if needed or to switch from a split to a solid collet. Simply replace the drawbar and collet to the desired size. A. Split Collet - Used for holding cutters solidly while doing light milling, cutouts, & other heavy engraving. Collet spindles hold both long & short cutters. B. Solid Collet - Converts your collet spindle to a standard top load spindle for standard engraving or burnishing. C. Drawbar - For use with the collet spindle.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
BURNISHING ADAPTOR Designed to assist in burnishing lacquered brass and anodized metals with just the right amount of pressure. Also used to mark glass. Available in 1/8”, 11/64”, 1/4”, 4mm and 6mm sizes. Part # 200702-00 (11/64") Part # 200701-00 (1/8") Part # 200703-00 (1/4") Part # 200707-00 (4mm) Part # 200708-00 (6mm) |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
CUTTER WRENCH Durable aluminum handle “Vision” cutter wrench. Part # 200538-00 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
VACUUM CHIP REMOVAL SYSTEM Quiet vacuum pump for removing engraving chips. The unit has a large filtered canister with replaceable collection bag. Includes vacuum nose cone and kink resistant hose. Part # 200506-00 - (1/4 HP pump with large nose) Part # 200507-00 - (1/4 HP small nose) Part # 15-0029-00 - (10’ kink resistant hose) Part # 15-0026-00 - (10’ kink resistant hose w/ large nose) Part # 15-0027-00 - (10’ kink resistant hose w/ small nose) |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
